Aerial lifts offer workers a safe work platform that will provide access to hard to reach or temporary locations, while being relatively easy to move and relocate. Unfortunately there can be severe injuries or fatalities when they are not used properly. Major causes of accidents include:
- Falls when the lift is struck by vehicles or objects fall onto the user.
- Falls while working outside of the rails.
- Being crushed or caught between work platform/bucket edge and an object.
- Ejection from work platform due to wind or sudden jerks.
- Tip-over due to boom collapse.*
- Falls when lift suddenly jerks.*
- Tip-over due to steep slope, rough or unstable terrain.*
- Electrocution when coming into contact with overhead power lines.*
*Inspections may prevent these accidents
- Familiarize yourself with the lift and manufactures operating manual prior to inspecting equipment.
- Walk all paths you will travel and look for hazards – wires, other work in the area, over head power lines, etc.
- Check all surfaces and ground conditions prior to beginning work.
- Check the wheels and tires.
- Check safety devices such as outrigger and guardrails.
- Check all operating and emergency controls – both ground and upper controls.
- Check your own personal fall protection equipment and know where to anchor.
- Immediately report any unsafe conditions.
Basic Rules for Operator Safety
- Aerial lift operators must receive formal training on the particular make and model prior to use.
- Read the manufacturer’s manual before using for the first time.
- Identify all manufacturer approved anchor points.
- Refresh your safety knowledge by rereading the manufacturer’s manual quarterly – rental equipment manuals do change.
- Never operate and always report unsafe equipment to supervision.
KEMI does not assume liability for the content of information contained herein. Safety and health remain your responsibility. This information is to be used for informational purposes only and not intended to be exhaustive or a substitute for proper training, supervision or manufacturers’ instructions/recommendations. KEMI, by publication of this information, does not assume liability for damage or injury arising from reliance upon it. Compliance with this information is not a guarantee or warranty that you will be in conformity with any laws or regulations nor does it ensure the absolute safety of any person, place or object, including, but not limited to, you, your occupation, employees, customers or place of business.