Print a Sign-In Sheet | Spanish Version
- Do not use high beams when the car in front of you is lower to the ground than yours.
- Never use high beams when there is heavy oncoming traffic.
- When approaching a sharp curve at night, do not accelerate, drive on the line in the center of the road, or keep on your high beams.
- Use your headlights all the time, even when it is not pitch dark outside.
- If one of your headlights burns out, get it fixed; don’t just use your high beams until you find time to get it replaced.
- If you drive a vehicle that is significantly higher off the ground than most other cars, do not pull up to a stop sign/red light a foot to the left of the car in front. If you do, your headlights will reflect off the other car’s side view mirror and directly into the driver’s face.
- When you see a newer model car with the daytime lights on, do not flash your headlights several times to remind the other driver that his lights are on.
- When an oncoming driver flashes his high beams on and off to tell you that your high beams are on, pay attention and turn them off.
- When driving at night with a burned-out headlight, don’t drive so that the working headlight is in the middle of the lane; to other drivers, you can appear to be operating a motorcycle.
KEMI does not assume liability for the content of information contained herein. Safety and health remain your responsibility. This information is to be used for informational purposes only and not intended to be exhaustive or a substitute for proper training, supervision, or manufacturers’ instructions/recommendations. KEMI, by publication of this information, does not assume liability for damage or injury arising from reliance upon it. Compliance with this information is not a guarantee or warranty that you will be in conformity with any laws or regulations nor does it ensure the absolute safety of any person, place, or object, including, but not limited to, you, your occupation, employees, customers, or place of business.
